|
[ 114
]
Comparative analysis of maximum power extraction and control methods between PMSG and PMVG-based wind turbine systems
|
|
Kumarasamy Palanimuthu, Ganesh Mayilsamy, Seong Ryong Lee, Sang Yong Jung, Young Hoon Joo, "Comparative analysis of maximum power extraction and control methods between PMSG and PMVG-based wind turbine systems", International Journal of Electrical Power and Energy Systems, 2022.12
|
|
[ 113
]
Calculation of Parasitic Capacitance to Analyze Shaft Voltage of Electric Motor with Direct-Oil Cooling System
|
|
Chan-Ho Kim, Sung-Bae Jun, Han-Joon Yoon, Nam-Ho Kim, Ho-Chang Jung, Rae-Eun Kim, Sang-Yong Jung, "Calculation of Parasitic Capacitance to Analyze Shaft Voltage of Electric Motor with Direct-Oil Cooling System", Processes, vol. 10, no. 8, pp. 1541, 2022.08
Link
|
|
[ 112
]
Torque Equation to Predict Torque Harmonic Characteristic of IPMSM According to Winding Arrangement, Number of Phases, and Pole-Slot Combination
|
|
Han-Joon Yoon, Sung-Bae Jun, Nam-Ho Kim, Yong-Jae Kim, Sang-Yong Jung, "Torque Equation to Predict Torque Harmonic Characteristic of IPMSM According to Winding Arrangement, Number of Phases, and Pole-Slot Combination", Journal of Electrical Engineering & Technology, vol. , no. , pp. , 2022
Link
|
|
[ 111
]
Back Yoke Design of Axial Flux Permanent Magnet Motors with Fractional‑Slot Concentrated Winding for High Power Density
|
|
Tae-Hyuk Ji, Chan-Ho Kim, Han-Joon Yoon, Nam-Ho Kim, Seok-Won Jung, Yong-Jae Kim, Sang-Yong Jung, "Back Yoke Design of Axial Flux Permanent Magnet Motors with Fractional‑Slot Concentrated Winding for High Power Density", Journal of Electrical Engineering & Technology, vol. , no. , pp. , 2022
Link
|
|
[ 110
]
Design and Analysis of Permanent-Magnet Vernier Machine for Direct-Driven Wind Power Generator Considering Pole-Slot Combinations
|
|
Hyung-Woo Kim, Seung-Gu Kang, Sang-Yong Jung, Han-Kyeol Yeo, "Design and Analysis of Permanent-Magnet Vernier Machine for Direct-Driven Wind Power Generator Considering Pole-Slot Combinations", Journal of Electrical Engineering & Technology, vol. , no. , pp. , 2022
Link
|
|
[ 109
]
Parameter Optimization for Reducing Torque Ripple and Harmonic Losses of Multi-Layered Interior Permanent-Magnet Synchronous Motors
|
|
Sung-Bae Jun, Chan-Ho Kim, Jin Hwan Lee, Jun-Kyu Kang, Yong-Jae Kim, Sang-Yong Jung, "Parameter Optimization for Reducing Torque Ripple and Harmonic Losses of Multi-Layered Interior Permanent-Magnet Synchronous Motors", IEEE Access, vol. 10, pp. 10536-10552, 2022.01
Link
|
|
[ 108
]
Robust Explorative Particle Swarm Optimization for Optimal Design of EV Traction Motor
|
|
Jinhwan Lee, Woo-Jung Kim, Sang-Yong Jung, "Robust Explorative Particle Swarm Optimization for Optimal Design of EV Traction Motor", Processes, vol. 9, no. 11, pp. 2000, 2021.11
Link
|
|
[ 107
]
Analysis and Verification of Traction Motor Iron Loss for Hybrid Electric Vehicles Based on Current Source Analysis Considering Inverter Switching Carrier Frequency
|
|
Jinhwan Lee, Woo-Jung Kim, Sang-Yong Jung, "Analysis and Verification of Traction Motor Iron Loss for Hybrid Electric Vehicles Based on Current Source Analysis Considering Inverter Switching Carrier Frequency", Electronics, vol. 10, no. 21, pp. 2714, 2021.11
Link
|
|
[ 106
]
Noise Reduction Design with Trapezoidal Back-EMF and Asymmetric Air-Gap for Single-Phase BLDC Refrigerator Cooling Fan Motor
|
|
Jinhwan Lee, Sang-Yong Jung, "Noise Reduction Design with Trapezoidal Back-EMF and Asymmetric Air-Gap for Single-Phase BLDC Refrigerator Cooling Fan Motor", Energies, vol. 14, no. 17, pp. 5467, 2021.06
Link
|
|
[ 105
]
A Novel Method for Establishing an Efficiency Map of IPMSMs for EV Propulsion Based on the Finite-Element Method and a Neural Network
|
|
Sung-Bae Jun, Yong-Jae Kim, Chan-Ho Kim, JuKyung Cha, Jin-Hwan Lee, Sang-Yong Jung, "A Novel Method for Establishing an Efficiency Map of IPMSMs for EV Propulsion Based on the Finite-Element Method and a Neural Network", Electronics, vol. 10, no. 9, 2021.04
Link
|
|
[ 104
]
Torque and Loss Characteristics of Magnetic Gear by Bonded PM Magnetization Direction
|
|
Eui-Jong Park, Sang-Yong Jung, Yong-Jae Kim, "Torque and Loss Characteristics of Magnetic Gear by Bonded PM Magnetization Direction", IEEE Trans. Magn., vol. 57, no. 6, 2021.03
Link
|
|
[ 103
]
Operation Characteristic of IPMSM considering PM Saturation Temperature
|
|
Dae-Woo Kim, Do Hyun Kang, Chan-Ho Kim, Jin-Seok Kim, Yong-Jae Kim, Sang-Yong Jung, "Operation Characteristic of IPMSM considering PM Saturation Temperature", IEEE Trans. Appl. Supercond, vol. 30, no. 4, pp. 1-4, 2020.06
Link
|
|
[ 102
]
Optimization Method to Maximize Efficiency Map of a Drive Motor with Electrical Winding Changeover Technique for Hybrid EV
|
|
Ho-Chang Jung, Dongsu Lee, Deok-Jin Kim, Sang-Yong Jung, "Optimization Method to Maximize Efficiency Map of a Drive Motor with Electrical Winding Changeover Technique for Hybrid EV", IEEE Trans. Appl. Supercond, vol. 30, no. 4, pp. 1-5, 2020.06
Link
|
|
[ 101
]
Comparison of Magnetic Gear Charateristics Using Different Permanent Magnet Materials
|
|
Eui-Jong Park, Sang-Yong Jung, Yong-Jae Kim, "Comparison of Magnetic Gear Charateristics Using Different Permanent Magnet Materials", IEEE Trans. Appl. Supercond, vol. 30, no. 4, pp. 1-4, 2020.06
Link
|
|
[ 100
]
Structure and Electromagnetic Characteristics of Pole-piece Support Materials in Magnetic Gear
|
|
Eui-Jong Park, Sang-Yong Jung, Yong-Jae Kim, "Structure and Electromagnetic Characteristics of Pole-piece Support Materials in Magnetic Gear", IEEE Trans. Appl. Supercond, vol. 30, no. 4, pp. 1-4, 2020.06
Link
|
|
[ 099
]
Genetic Algorithm with Species Differentiation based on Kernel Support Vector Machine for Optimal Design of Wind Generator
|
|
Byungkwan Son, Jong-Wook Kim, Dongsu Lee, Sang-Yong Jung, "Genetic Algorithm with Species Differentiation based on Kernel Support Vector Machine for Optimal Design of Wind Generator", IEEE Trans. Magn., vol. 55, no. 9, pp. 43469, 2019.09
Link
|
|
[ 098
]
Adaptive Particle Swarm Optimization based on Kernel Support Vector Machine for Optimal Design of Synchronous Reluctance Motor
|
|
Byungkwan Son, Jin-Seok Kim, Jong-Wook Kim, Yong-Jae Kim, Sang-Yong Jung, "Adaptive Particle Swarm Optimization based on Kernel Support Vector Machine for Optimal Design of Synchronous Reluctance Motor", IEEE Trans. Magn., vol. 55, no. 6, pp. 1-1, 2019.06
Link
|
|
[ 097
]
A gear efficiency improvement in magnetic gear by eddy-current loss reduction
|
|
Eui-Jong Park, Chan-Seung Kim, Sang-Yong Jung, Yong-Jae Kim, "A gear efficiency improvement in magnetic gear by eddy-current loss reduction", International Journal of Applied Electromagnetics and Mechanics, vol. 60, no. 1, pp. 103-112, 2019.04
Link
|
|
[ 096
]
Field-Winding Claw-Pole Type Motor Characteristics Analysis Using Additional Ferrite Magnets
|
|
Jin-Seok Kim, Dae-Woo Kim, Yong-Jae Kim, Sang-Yong Jung, "Field-Winding Claw-Pole Type Motor Characteristics Analysis Using Additional Ferrite Magnets", Journal of Magnetics, vol. 24, no. 1, pp. 179-183, 2019.03
Link
|
|
[ 095
]
Design of Vernier Motor Considering PM Irreversible Demagnetization for Abnormal Operating Condition
|
|
Dae-Woo Kim, Jun-Young Song, Do Hyun Kang, Jin-Seok Kim, Yong-Jae Kim, Sang-Yong Jung, "Design of Vernier Motor Considering PM Irreversible Demagnetization for Abnormal Operating Condition", Journal of Magnetics, vol. 24, no. 1, pp. 174-178, 2019.03
Link
|
|
[ 094
]
Magnetic Field Analysis of Notched SPMSM Using Conformal Mapping
|
|
Young-Yoon Ko, Jun-Young Song, Myung-Ki Seo, Yong-jae Kim, Sang-Yong Jung, "Magnetic Field Analysis of Notched SPMSM Using Conformal Mapping", Journal of Magnetics, vol. 24, no. 1, pp. 168-173, 2019.03
Link
|
|
[ 093
]
Analysis of Torque Characteristics according to Non-uniform Air Gaps of Coaxial Magnetic Gear
|
|
Eui-Jong Park, Chan-Seung Kim, Sang-Yong Jung, Yong-Jae Kim, "Analysis of Torque Characteristics according to Non-uniform Air Gaps of Coaxial Magnetic Gear", Journal of Magnetics, vol. 23, no. 4, pp. 675-679, 2018.12
Link
|
|
[ 092
]
Development of Differing Extent Mesh Adaptive Direct Search Applied for Optimal Design of Spoke-Type PMSM
|
|
Dongsu Lee, Jun-Young Song, Myung-Ki Seo, Ho-Chang Jung, Jong-Wook Kim, Sang-Yong Jung, "Development of Differing Extent Mesh Adaptive Direct Search Applied for Optimal Design of Spoke-Type PMSM", IEEE Trans. Magn., vol. 54, no. 11, pp. 1-1, 2018.11
Link
|
|
[ 091
]
Loss Reduction Optimization for Heat Capacity Improvement in Interior Permanent Magnet Synchronous Machine
|
|
Myung-Ki Seo, Tae-Yong Lee, Young-Yoon Ko,Yong-Jae Kim, Sang-Yong Jung, "Loss Reduction Optimization for Heat Capacity Improvement in Interior Permanent Magnet Synchronous Machine", IEEE Trans. Magn., vol. 54, no. 11, pp. 1-1, 2018.11
Link
|
|
[ 090
]
Analytical Method for Overhang Effect of Surface-Mounted Permanent-Magnet Motor Using Conformal Mapping
|
|
Young-Yoon Ko, Youn-Young Song , Myung-Ki Seo , Wonseok Han , Yong-Jae Kim, Sang-Yong Jung, "Analytical Method for Overhang Effect of Surface-Mounted Permanent-Magnet Motor Using Conformal Mapping", IEEE Trans. Magn., vol. 54, no. 11, pp. 1-1, 2018.11
Link
|
|
[ 089
]
A Novel Region Decision Method with Mesh Adaptive Direct Search Applied to Optimal FEA-Based Design of Interior PM Generator
|
|
Dongsu Lee, Jong-Wook Kim, Sang-Yong Jung, "A Novel Region Decision Method with Mesh Adaptive Direct Search Applied to Optimal FEA-Based Design of Interior PM Generator", Journal of Electrical Engineering & Technology, vol. 13, no. 4, pp. 1-1, 2018.07
Link
|
|
[ 088
]
Optimal Design of PMa-synRM for an Electric Propulsion System Considering Wide Operation Range and Demagnetization
|
|
Gyeong-Jae Park, Jin Seok Kim, Byungkwan Son, Sang-Yong Jung, "Optimal Design of PMa-synRM for an Electric Propulsion System Considering Wide Operation Range and Demagnetization", IEEE Trans. Appl. Supercond, vol. 28, no. 3, pp. 1-1, 2018.04
Link
|
|
[ 087
]
Irreversible Demagnetization Analysis with Respect to Winding Connection and Current Ripple in Brushless DC Motor
|
|
Myung-Ki Seo, Tae-Yong Lee, Young-Yoon Ko,Yong-Jae Kim, Sang-Yong Jung, "Irreversible Demagnetization Analysis with Respect to Winding Connection and Current Ripple in Brushless DC Motor", IEEE Trans. Appl. Supercond, vol. 28, no. 3, pp. 1-1, 2018.04
Link
|
|
[ 086
]
Electromagnetic Performances Analysis of IPMSM According to the Current Control Method Under Flux-Weakening Control Region
|
|
Tae-Yong Lee, Myung-Ki Seo, Young-Yoon Ko,Yong-Jae Kim, Sang-Yong Jung, "Electromagnetic Performances Analysis of IPMSM According to the Current Control Method Under Flux-Weakening Control Region", IEEE Trans. Appl. Supercond, vol. 28, no. 3, pp. 1-1, 2018.04
Link
|
|
[ 085
]
Analysis and Design of SPM Type Variable Flux Memory Motor Considering Demagnetization Characteristic of Permanent Magnet
|
|
Jin Seok Kim, Gyeong-Jae Park ,Yong-Jae Kim, Sang-Yong Jung, "Analysis and Design of SPM Type Variable Flux Memory Motor Considering Demagnetization Characteristic of Permanent Magnet", IEEE Trans. Appl. Supercond, vol. 28, no. 3, pp. 1-1, 2018.04
Link
|
|
[ 084
]
Compensation Strategy of the Numerical Analysis in Frequency Domain on Induction Motor Considering Magnetic Flux Saturation
|
|
Gyeong-Jae Park, Byungkwan Son, SangHyeok Seo, Ji-Han Lee, Yong-Jae Kim, Sang-Yong Jung, "Compensation Strategy of the Numerical Analysis in Frequency Domain on Induction Motor Considering Magnetic Flux Saturation", IEEE Trans. Magn., vol. 54, no. 3, pp. 1-1, 2018.03
Link
|
|
[ 083
]
A Robust Multimodal Optimization Algorithm based on a sub-division surrogate model and an improved sampling method
|
|
Hyeon-Jeong Park, Han-Kyeol Yeo, Sang-Yong Jung, Tae-Kyung Chung, Jong-Suk Ro, Hyun-Kyo Jung, "A Robust Multimodal Optimization Algorithm based on a sub-division surrogate model and an improved sampling method", IEEE Trans. Magn., vol. 54, no. 3, pp. 1-1, 2018.03
Link
|
|
[ 082
]
A Novel Sequential-Stage Optimization Strategy for an Interior Permanent Magnet Synchronous Generator Design
|
|
Dong-Kuk Lim, Sang-Yong Jung, Kyung-Pyo Yi, Hyun-Kyo Jung, Hyun-Kyo Jung, "A Novel Sequential-Stage Optimization Strategy for an Interior Permanent Magnet Synchronous Generator Design", IEEE Trans. Ind. Electron., vol. 65, no. 2, pp. 1-1, 2018.02
Link
|
|
[ 081
]
Particle Swarm Optimization Algorithm with Intelligent Particle Number Control for Optimal Design of Electric Machines
|
|
Jinhwan Lee, Jun-Young Song, Dae-Woo Kim, Jong-Wook Kim, Yong-Jae Kim , Sang-Yong Jung, "Particle Swarm Optimization Algorithm with Intelligent Particle Number Control for Optimal Design of Electric Machines", IEEE Trans. Ind. Electron., vol. 65, no. 2, pp. 1-1, 2018.02
Link
|
|
[ 080
]
Analytical prediction of cogging torque for interior permanent magnet synchronous motors
|
|
Dong-Kuk Lim, Hyun-Kyo Jung, Jong-Suk Ro, Sang-Yong Jung, "Analytical prediction of cogging torque for interior permanent magnet synchronous motors", International Journal of Applied Electromagnetics and Mechanics, vol. 55, no. 4, pp. 625-635, 2017.11
Link
|
|
[ 079
]
Sizing Optimization of the Synchronous Generator and the Measurement Uncertainty Analysis
|
|
Youn-Hwan Kim, Hae-Joong Kim, Sang-Yong Jung , Jae-Won Moon , "Sizing Optimization of the Synchronous Generator and the Measurement Uncertainty Analysis", IEEE Trans. Magn., vol. 53, no. 11, pp. 1-1, 2017.11
Link
|
|
[ 078
]
Analysis and Modeling of Permanent Magnet Variable Flux Memory Motors Using Magnetic Equivalent Circuit Method
|
|
Jun-Young Song, Jin Hwan Lee, Dae-Woo Kim, Yong-Jae Kim, Sang-Yong Jung, "Analysis and Modeling of Permanent Magnet Variable Flux Memory Motors Using Magnetic Equivalent Circuit Method", IEEE Trans. Magn., vol. 53, no. 11, pp. 1-1, 2017.11
Link
|
|
[ 077
]
Design Optimization of High-Speed Machines for Underwater Electric Thrusting Systems considering Magnetic Flux Density Distribution
|
|
Jung-Hyung Park, Kyu-Seok Lee, Sung-Ho Lee, Sang-Yong Jung, "Design Optimization of High-Speed Machines for Underwater Electric Thrusting Systems considering Magnetic Flux Density Distribution", Journal of Magnetics, vol. 22, 2017.09
Link
|
|
[ 076
]
Transfer Torque Performance Comparison in Coaxial Magnetic Gears with Different Flux-Modulator Shapes
|
|
Sung-Jin Kim, Eui-Jong Park, Sang-Yong Jung, Yong-Jae Kim, "Transfer Torque Performance Comparison in Coaxial Magnetic Gears with Different Flux-Modulator Shapes", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 075
]
Electromagnetic and Thermal Analysis of a Surface-Mounted Permanent-Magnet Motor with Overhang Structure
|
|
Han-Kyeol Yeo, Hyeon-Jung Park, Jung Moo Seo, Sang-Yong Jung, Jong-Suk Ro, Jong-Suk Ro, "Electromagnetic and Thermal Analysis of a Surface-Mounted Permanent-Magnet Motor with Overhang Structure", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 074
]
Field Reconstruction Method in Axial Flux Permanent Magnet Motor with Overhang Structure
|
|
Hyeon-Jeong Park, Hyun-Kyo Jung, Sang-Yong Jung, Young-Hoon Chae, Don-Kyun Woo, "Field Reconstruction Method in Axial Flux Permanent Magnet Motor with Overhang Structure", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 073
]
Optimal Design and Validation of IPMSM for Maximum Efficiency Distribution compatible to Energy Consumption Areas of HD-EV
|
|
Ho-Chang Jung, Gyeong-Jae Park, Deok-Jin Kim, Sang-Yong Jung, "Optimal Design and Validation of IPMSM for Maximum Efficiency Distribution compatible to Energy Consumption Areas of HD-EV", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 072
]
Design Characteristics of IPMSM with Wide Constant Power Speed Range for EV Traction
|
|
Jung-Min Mun, Gyeong-Jae Park, SangHyeok Seo, Dae-Woo Kim, Yong-Jae Kim, Sang-Yong Jung, "Design Characteristics of IPMSM with Wide Constant Power Speed Range for EV Traction", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 071
]
Characteristics Analysis Method of Axial Flux Permanent Magnet Motor based on 2-D Finite Element Analysis
|
|
Jin Seok Kim, Jin Hwan Lee, Jun-Young Song, Dae-Woo Kim, Yong-Jae Kim, Sang-Yong Jung, "Characteristics Analysis Method of Axial Flux Permanent Magnet Motor based on 2-D Finite Element Analysis", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 070
]
Hybridization Algorithm of Fireworks Optimization and Generating Set Search for Optimal Design of IPMSM
|
|
Dae-Woo Kim, Gyeong-Jae Park, Ji-Han Lee, Jong-Wook Kim, Yong-Jae Kim, Sang-Yong Jung, "Hybridization Algorithm of Fireworks Optimization and Generating Set Search for Optimal Design of IPMSM", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 069
]
Global-Simplex Optimization Algorithm Applied to FEM based Optimal Design of Electric Machine
|
|
Wonseok Han, Chan Van Dang, Jong-Wook Kim, Yong-Jae Kim, Sang-Yong Jung, "Global-Simplex Optimization Algorithm Applied to FEM based Optimal Design of Electric Machine", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 068
]
Analysis and Modeling of Concentrated Winding Variable Flux Memory Motor Using Magnetic Equivalent Circuit Method
|
|
Jun-Young Song, Jin Hwan Lee, Dae-Woo Kim, Yong-Jae Kim, Sang-Yong Jung, "Analysis and Modeling of Concentrated Winding Variable Flux Memory Motor Using Magnetic Equivalent Circuit Method", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 067
]
Principal Component Optimization with Mesh Adaptive Direct Search for Optimal Design of IPMSM
|
|
Myung-Ki Seo, Tae-Yong Lee, Jong-Wook Kim, Yong-Jae Kim, Sang-Yong Jung, "Principal Component Optimization with Mesh Adaptive Direct Search for Optimal Design of IPMSM", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 066
]
Novel Design Method to Reduce Input Current for Multi-Operating Point IPMSM
|
|
SangHyeok Seo, Gyeong-Jae Park, Byungkwan Son, Yong-Jae Kim, Sang-Yong Jung, "Novel Design Method to Reduce Input Current for Multi-Operating Point IPMSM", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 065
]
Distance-based Intelligent Particle Swarm Optimization for Optimal Design of Permanent Magnet Synchronous Machine
|
|
Jinhwan Lee, Jong-Wook Kim, Jun-Young Song, Dae-Woo Kim, Yong-Jae Kim, Sang-Yong Jung, "Distance-based Intelligent Particle Swarm Optimization for Optimal Design of Permanent Magnet Synchronous Machine", IEEE Trans. Magn., vol. 53, no. 6, pp. 1-1, 2017.06
Link
|
|
[ 064
]
Optimum design of end edge in discontinuous armature permanent magnet linear motors for automation transportation systems
|
|
Sung-Jin Kim, Eui-Jong Park, Sang-Yong Jung, Yong-Jae Kim, "Optimum design of end edge in discontinuous armature permanent magnet linear motors for automation transportation systems", International Journal of Precision Engineering and Manufacturing, vol. 18, no. 3, pp. 317-323, 2017.03
Link
|
|
[ 063
]
An Optimal Design Strategy for a Thomson Coil Actuator
|
|
Dong-Kuk Lim, Kyung-Pyo Yi, Sang-Yong Jung, Hyun-Kyo Jung, Jong-Suk Ro, "An Optimal Design Strategy for a Thomson Coil Actuator", Journal of Electrical Engineering & Technology, vol. 12, no. 1, pp. 182-188, 2017.01
Link
|
|
[ 062
]
Characteristic Analysis and Experimental Verification of an Axially Asymmetric Structured Outer-Rotor Type Permanent Magnet Motor
|
|
Myung-Ki Seo, Tae-Yong Lee, Kyungsoo Park, Yong-Jae Kim, Sang-Yong Jung, "Characteristic Analysis and Experimental Verification of an Axially Asymmetric Structured Outer-Rotor Type Permanent Magnet Motor", Journal of Electrical Engineering & Technology, vol. 11, no. 4, pp. 709-715, 2016.07
Link
|
|
[ 061
]
Optimal Design of Reformed Auxiliary Teeth for Reducing End Detent Force of Stationary Discontinuous Armature PMLSM
|
|
Sung-Jin Kim, Eui-Jong Park, Sang-Yong Jung, Yong-Jae Kim, "Optimal Design of Reformed Auxiliary Teeth for Reducing End Detent Force of Stationary Discontinuous Armature PMLSM", IEEE Trans. Appl. Supercond, vol. 26, no. 4, pp. 5203305, 2016.06
Link
|
|
[ 060
]
Design of IPMSM applying V-shape Skew considering Axial Force Distribution and Performance Characteristics according to the Rotating Direction
|
|
Gyeong-Jae Park, Yong-Jae Kim, Sang-Yong Jung, "Design of IPMSM applying V-shape Skew considering Axial Force Distribution and Performance Characteristics according to the Rotating Direction", IEEE Trans. Appl. Supercond, vol. 26, no. 4, pp. 605205, 2016.06
Link
|
|
[ 059
]
Motor Design and Characteristics Comparison of Outer-Rotor type BLDC Motor and BLAC Motor Based on Numerical Analysis
|
|
Tae-Yong Lee, Myung-Ki Seo, Yong-Jae Kim, Sang-Yong Jung, "Motor Design and Characteristics Comparison of Outer-Rotor type BLDC Motor and BLAC Motor Based on Numerical Analysis", IEEE Trans. Appl. Supercond, vol. 26, no. 4, pp. 5205506, 2016.06
Link
|
|
[ 058
]
A comparative analysis of power density for single-stage and dual-stage magnetic gear with rare-earth magnets and non rare-earth magnets
|
|
Chan-Ho Kim, Sang-Yong Jung, Yong-Jae Kim, "A comparative analysis of power density for single-stage and dual-stage magnetic gear with rare-earth magnets and non rare-earth magnets", International Journal of Applied Electromagnetics and Mechanics, vol. 51, no. 1, pp. 83-89, 2016.04
Link
|
|
[ 057
]
Optimal Design for Thrust Ripple Reduction of Stationary Distributed-Armature System
|
|
Eui-Jong Park, Sang-Yong Jung, Kyoung-Pil Cho, Yong-Jae Kim, "Optimal Design for Thrust Ripple Reduction of Stationary Distributed-Armature System", Journal of Magnetics, vol. 21, no. 1, pp. 72-77, 2016.03
Link
|
|
[ 056
]
A Design of Optimal Interval between Armatures in Long Distance Transportation PMLSM for End Cogging Force Reduction
|
|
Eui-Jong Park, Sang-Yong Jung, Yong-Jae Kim, "A Design of Optimal Interval between Armatures in Long Distance Transportation PMLSM for End Cogging Force Reduction", Journal of Electrical Engineering & Technology, vol. 11, no. 2, pp. 361-366, 2016.03
Link
|
|
[ 055
]
Shape Optimization of a Hybrid Magnetic Torque Converter Using the Multiple Linear Regression Analysis
|
|
Sung-Jin Kim, Chan-Ho Kim, Sang-Yong Jung, Yong-Jae Kim, "Shape Optimization of a Hybrid Magnetic Torque Converter Using the Multiple Linear Regression Analysis", IEEE Trans. Magn., vol. 52, no. 3, pp. 8102504, 2016.03
Link
|
|
[ 054
]
Optimal Design of an Axial Flux Permanent Magnet Synchronous Motor for the Electric Bicycle
|
|
Dong-Kuk Lim, Yong-Sun Cho, Jong-Suk Ro, Hyun-Kyo Jung, Sang-Yong Jung, "Optimal Design of an Axial Flux Permanent Magnet Synchronous Motor for the Electric Bicycle", IEEE Trans. Magn., vol. 52, no. 3, pp. 8201204, 2016.03
Link
|
|
[ 053
]
Mass Ionized Particle Optimization Algorithm Applied to Optimal FEA-based Design of Electric Machine
|
|
Wonseok Han, Trung Tin Tran, Jong-Wook Kim, Yong-Jae Kim, Sang-Yong Jung, "Mass Ionized Particle Optimization Algorithm Applied to Optimal FEA-based Design of Electric Machine", IEEE Trans. Magn., vol. 52, no. 3, pp. 8200404, 2016.03
Link
|
|
[ 052
]
Computational Method of Effective Remanence Flux Density to Consider PM Overhang Effect for Spoke Type PM Motor with 2-D Analysis Using Magnetic Energy
|
|
Jun-Young Song, Jinhwan Lee, Yong-Jae Kim, Sang-Yong Jung, "Computational Method of Effective Remanence Flux Density to Consider PM Overhang Effect for Spoke Type PM Motor with 2-D Analysis Using Magnetic Energy", IEEE Trans. Magn., vol. 52, no. 3, pp. 8200304, 2016.03
Link
|
|
[ 051
]
Interstellar Search Method with Mesh Adaptive Direct Search for Optimal Design of Brushless DC Motor
|
|
Byungkwan Son, Gyeong-Jae Park, Jong-Wook Kim, Yong-Jae Kim, Sang-Yong Jung, "Interstellar Search Method with Mesh Adaptive Direct Search for Optimal Design of Brushless DC Motor", IEEE Trans. Magn., vol. 52, no. 3, pp. 8201004, 2016.03
Link
|
|
[ 050
]
Search Region Management Method for Local Search Algorithm Employing Design Optimization of Brushless DC Motor
|
|
Tae-Yong Lee, Pham Xuan Trung, Jong-Wook Kim, Yong-Jae Kim, Sang-Yong Jung, "Search Region Management Method for Local Search Algorithm Employing Design Optimization of Brushless DC Motor", IEEE Trans. Magn., vol. 52, no. 3, pp. 8200606, 2016.03
Link
|
|
[ 049
]
A Novel Memetic Algorithm Using Modified Particle Swarm Optimization and Mesh Adaptive Direct Search for PMSM Design
|
|
Jinhwan Lee, Jong-Wook Kim, Jun-Young Song, Yong-Jae Kim, Sang-Yong Jung, "A Novel Memetic Algorithm Using Modified Particle Swarm Optimization and Mesh Adaptive Direct Search for PMSM Design ", IEEE Trans. Magn., vol. 52, no. 3, pp. 7001604, 2016.03
Link
|
|
[ 048
]
Optimal Design of an Interior Permanent Magnet Synchronous Motor by Using a New Surrogate-Assited Multi-Objective Optimization
|
|
Dong-KuK Lim, Kyung-Pyo Yi, Sang-Yong Jung, Hyun-Kyo Jung, Jong-Suk Ro, "Optimal Design of an Interior Permanent Magnet Synchronous Motor by Using a New Surrogate-Assited Multi-Objective Optimization", IEEE Trans. Magn., vol. 51, no. 11, pp. 8207504, 2015.11
Link
|
|
[ 047
]
Optimal Design of Novel Pole Piece for Power Density Improvement of Magnetic Gear Using Polynomial Regression Analysis
|
|
Sung-Jin Kim, Chan-Ho Kim, Sang-Yong Jung, Yong-Jae Kim, "Optimal Design of Novel Pole Piece for Power Density Improvement of Magnetic Gear Using Polynomial Regression Analysis", IEEE Trans. Energy Convers., vol. 30, no. 3, pp. 1171-1179, 2015.09
Link
|
|
[ 046
]
Design and Torque Ripple Analysis of Brush-less DC Motor According to Delta Winding Connection
|
|
Tae-Yong Lee, Myung-Ki Seo, Yong-Jae Kim, Sang-Yong Jung, "Design and Torque Ripple Analysis of Brush-less DC Motor According to Delta Winding Connection", Journal of Magnetics, vol. 20, no. 2, pp. 166-175, 2015.06
Link
|
|
[ 045
]
Air-Barrier Width Prediction of Interior Permanent Magnet Motor for Electric Vehicle Considering Fatigue Failure by Centrifugal Force
|
|
Sung-Jin Kim, Sang-Yong Jung, Yong-Jae Kim, "Air-Barrier Width Prediction of Interior Permanent Magnet Motor for Electric Vehicle Considering Fatigue Failure by Centrifugal Force", Journal of Electrical Engineering & Technology, vol. 10, no. 3, pp. 952-957, 2015.05
Link
|
|
[ 044
]
A novel surrogate-assisted multi-objective optimization algorithm for an electromagnetic machine design
|
|
Dong-KuK Lim, Dong-Kyun Woo, Han-Kyeol Yeo, Sang-Yong Jung, Hyun-Kyo Jung, Jong-Suk Ro, "A novel surrogate-assisted multi-objective optimization algorithm for an electromagnetic machine design", IEEE Trans. Magn., vol. 51, no. 3, pp. 8200804, 2015.03
Link
|
|
[ 043
]
Phase Advance Control to Reduce Torque Ripple of Brushless DC Motor According to Winding Connection, Wye and Delta
|
|
Tae-Yong Lee, Jun-Young Song, Jaehong Kim, Yong-Jae Kim, Sang-Yong Jung, Jungmun Jae, "Phase Advance Control to Reduce Torque Ripple of Brushless DC Motor According to Winding Connection, Wye and Delta", Journal of Electrical Engineering & Technology, vol. 9, no. 6, pp. 2201-2208, 2014.11
Link
|
|
[ 042
]
Commutation Control for Low Commutation Torque Ripple in Position Sensorless Drive of Low-Voltage Brushless DC Motor
|
|
Sang-Yong Jung, Yong-Jae Kim, Jungmun Jae, Jaehong Kim, "Commutation Control for Low Commutation Torque Ripple in Position Sensorless Drive of Low-Voltage Brushless DC Motor", IEEE Trans. Power Electron., vol. 29, no. 11, pp. 5983-5994, 2014.11
Link
|
|
[ 041
]
Survey of a Contact Model and Characteristic Analysis method for a Travelling Wave Ultrasonic Motor
|
|
Jong-Suk Ro, Sang-Yong Jung, Cheol-Gyun Lee, Hyun-Kyo Jung, Hyun-Kyo Jung, "Survey of a Contact Model and Characteristic Analysis method for a Travelling Wave Ultrasonic Motor", International Journal of Applied Electromagnetics and Mechanics, vol. 46, no. 3, pp. 437-453, 2014.09
Link
|
|
[ 040
]
Minimization of a Cogging Torque for an Interior Permanent Magnet Synchronous Machine using a Novel Hybrid Optimization Algorithm
|
|
Il-Woo Kim, Dong-Kyun Woo, Sang-Yong Jung. Cheol-Gyun Lee, Hyun-Kyo Jung, Jong-Suk Ro, "Minimization of a Cogging Torque for an Interior Permanent Magnet Synchronous Machine using a Novel Hybrid Optimization Algorithm", Journal of Electrical Engineering & Technology, vol. 9, no. 3, pp. 859-865, 2014.05
Link
|
|
[ 039
]
Numerical and Experimental Design Validation for Adaptive Efficiency Distribution compatible to Frequent Operating Range of IPMSM
|
|
Hochang Jung, Deokjin Kim, Chun-beom Lee, Jihyun Ahn, Sang-Yong Jung, "Numerical and Experimental Design Validation for Adaptive Efficiency Distribution compatible to Frequent Operating Range of IPMSM ", IEEE Trans. Magn., vol. 50, no. 2, pp. 7021804, 2014.02
Link
|
|
[ 038
]
Numerical Design Compatibility of Induction Motor with Respect to Voltage and Current Source
|
|
Jihyun Ahn, Dongsu Lee, Gyeong-Jae Park, Yong-Jae Kim, Jinsung Kim, Sang-Yong Jung, "Numerical Design Compatibility of Induction Motor with Respect to Voltage and Current Source", IEEE Trans. Magn., vol. 50, no. 2, pp. 7019104, 2014.02
Link
|
|
[ 037
]
Design of Auxiliary Teeth on the Edge of Stationary Discontinuous Armature PM-LSM with Concentrated Winding
|
|
Sung-Jin Kim, Sang-Yong Jung, Yong-Jae Kim, "Design of Auxiliary Teeth on the Edge of Stationary Discontinuous Armature PM-LSM with Concentrated Winding", Journal of Magnetics, vol. 18, no. 3, pp. 352-356, 2013.09
Link
|
|
[ 036
]
Design Techniques for Reducing Cogging Torque in Permanent Magnet Flux Switching Machine
|
|
Daohan Wang, Xiuhe Wang, Sang-Yong Jung, "Design Techniques for Reducing Cogging Torque in Permanent Magnet Flux Switching Machine", Journal of Magnetics, vol. 18, no. 3, pp. 361-364, 2013.09
Link
|
|
[ 035
]
Numerical Analysis on Iron Loss and PM Loss of Permanent Magnet Synchronous Motor Considering the Carrier Harmonics
|
|
Dongsu Lee, Yong-Jae Kim, Sang-Yong Jung, "Numerical Analysis on Iron Loss and PM Loss of Permanent Magnet Synchronous Motor Considering the Carrier Harmonics", Journal of Magnetics, vol. 18, no. 2, pp. 216-219, 2013.06
Link
|
|
[ 034
]
Design Characteristics of Torque Harmonics Reduction of Induction Motors for Electric Vehicle Propulsion
|
|
Kyung-Won Jeon, Yong-Jae Kim, Sang-Yong Jung, "Design Characteristics of Torque Harmonics Reduction of Induction Motors for Electric Vehicle Propulsion", Journal of Magnetics, vol. 18, no. 2, pp. 212-215, 2013.06
Link
|
|
[ 033
]
Min-Max Univariate Dynamic Encoding Algorithm for Searches (uDEAS) and Its Application to Optimal Design of Electric Machines
|
|
Jong-wook Kim, Dongsu Lee, Sang-Yong Jung, "Min-Max Univariate Dynamic Encoding Algorithm for Searches (uDEAS) and Its Application to Optimal Design of Electric Machines", IEEE Trans. Magn., vol. 49, no. 5, pp. 2201-2204, 2013.05
Link
|
|
[ 032
]
Intelligent MADS With Clustering and Elastic Net and Its Application to Optimal Design of Interior PM Synchronous Machines
|
|
Jong-wook Kim, Younglim Choi, Dongsu Lee, Sang-Yong Jung, "Intelligent MADS With Clustering and Elastic Net and Its Application to Optimal Design of Interior PM Synchronous Machines", IEEE Trans. Magn., vol. 49, no. 5, pp. 2209-2212, 2013.05
Link
|
|
[ 031
]
Cogging Torque Minimization and Torque Ripple Suppression in Surface-mounted Permanent Magnet Synchronous Machines Using Different Magnet Widths
|
|
Daohan Wang, Xiuhe Wang, Sang-Yong Jung, "Cogging Torque Minimization and Torque Ripple Suppression in Surface-mounted Permanent Magnet Synchronous Machines Using Different Magnet Widths", IEEE Trans. Magn., vol. 49, no. 5, pp. 2295-2298, 2013.05
Link
|
|
[ 030
]
Reduction on Cogging Torque in Flux-Switching Permanent Magnet Machine by Teeth Notching Schemes
|
|
Daohan Wang, Xiuhe Wang, Sang-Yong Jung, "Reduction on Cogging Torque in Flux-Switching Permanent Magnet Machine by Teeth Notching Schemes", IEEE Trans. Magn., vol. 48, no. 11, pp. 4228-4231, 2012.11
Link
|
|
[ 029
]
Integrated Optimization of Two Design Techniques for Cogging Torque Reduction Combined With Analytical Method by a Simple Gradient Descent Method
|
|
Daohan Wang, Xiuhe Wang, Mun-kyeom Kim, Sang-Yong Jung, "Integrated Optimization of Two Design Techniques for Cogging Torque Reduction Combined With Analytical Method by a Simple Gradient Descent Method", IEEE Trans. Magn., vol. 48, no. 8, pp. 2265-2276, 2012.08
Link
|
|
[ 028
]
Optimal Design of Direct-Driven PM Wind Generator Using Adaptive Univariate Dynamic Encoding Algorithm for Searches (uDEAS)
|
|
Sang-Yong Jung, Dongsu Lee, Min-Goo Choi, Jong-Wook Kim, "Optimal Design of Direct-Driven PM Wind Generator Using Adaptive Univariate Dynamic Encoding Algorithm for Searches (uDEAS)", International Journal Applied Electromagnetics and Mechanics, vol. 38, no. 4, pp. 167-180, 2012.06
Link
|
|
[ 027
]
Numerical Investigation on Torque Harmonics Reduction of Interior PM Synchronous Motor with Concentrated Winding
|
|
Seungho Lee, Yong Jae Kim, Sang-Yong Jung, "Numerical Investigation on Torque Harmonics Reduction of Interior PM Synchronous Motor with Concentrated Winding", IEEE Trans. Magn., vol. 48, no. 2, pp. 927-930, 2012.02
Link
|
|
[ 026
]
Numerical Investigation on Permanent-Magnet Eddy Current Loss and Harmonic Iron Loss for PM skewed IPMSM
|
|
Jinwoo Lim, Yong Jae Kim, Sang-Yong Jung, "Numerical Investigation on Permanent-Magnet Eddy Current Loss and Harmonic Iron Loss for PM skewed IPMSM", Journal of Magnetics, vol. 16, no. 4, pp. 417-422, 2011.12
Link
|
|
[ 025
]
Numerical Analysis and Design of Moving Contactless High Power Transformer
|
|
Dongsu Lee, Donguk Jang, Hyung-Chul Kim, Sang-Yong Jung, "Numerical Analysis and Design of Moving Contactless High Power Transformer", Journal of Magnetics, vol. 16, no. 4, pp. 423-426, 2011.12
Link
|
|
[ 024
]
Reducing Cogging Torque in Surface-mounted Permanent Magnet Motors by Nonuniformly Distributed Teeth Method
|
|
Daohan Wang, Dongwei Qiao, Ying Pei, Sang-Yong Jung, Xiuhe Wang, "Reducing Cogging Torque in Surface-mounted Permanent Magnet Motors by Nonuniformly Distributed Teeth Method", IEEE Trans. Magn., vol. 47, no. 9, pp. 2231-2239, 2011.09
Link
|
|
[ 023
]
Minimization of Cogging Force in a Stationary Discontinuous Armature Linear Permanent Magnet Motor at the Outlet Edge
|
|
Yong-Jae Kim, Sang-Yong Jung, "Minimization of Cogging Force in a Stationary Discontinuous Armature Linear Permanent Magnet Motor at the Outlet Edge", Journal of Magnetics, vol. 16, no. 3, pp. 288-293, 2011.09
Link
|
|
[ 022
]
Novel Analysis and Design Methodology of Interior Permanent Magnet Synchronous Motor Using Newly Adopted Synthetic Flux Linkage
|
|
Seungho Lee, Yu-seok Jeong, Yong-Jae Kim, Sang-Yong Jung, "Novel Analysis and Design Methodology of Interior Permanent Magnet Synchronous Motor Using Newly Adopted Synthetic Flux Linkage", IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 3806-3814, 2011.09
Link
|
|
[ 021
]
Finite-Element analysis of Short-Circuit Electromagnetic Force in Power Transformer
|
|
Hyun-Mo Ahn, Ji-Yeon Lee, Joong-Kyoung Kim, Yeon-Ho Oh, Sang-Yong Jung, Sung-Chin Hahn, "Finite-Element analysis of Short-Circuit Electromagnetic Force in Power Transformer", IEEE Trans. Ind. Appl., vol. 47, no. 3, pp. 1267-1272, 2011.05
Link
|
|
[ 020
]
Intelligent Memetic Algorithm Using GA and Guided MADS for the Optimal Design of Interior PM Synchronous Machine
|
|
Dongsu Lee, Seunhgo Lee, Jong-Wook Kim, Cheol-Gyun Lee, Sang-Yong Jung, "Intelligent Memetic Algorithm Using GA and Guided MADS for the Optimal Design of Interior PM Synchronous Machine", IEEE Trans. Magn., vol. 47, no. 5, pp. 1230-1233, 2011.05
Link
|
|
[ 019
]
Variable Mesh Adaptive Direct Search Algorithm Applied for Optimal Design of Electric Machines Based on FEA
|
|
Dongsu Lee, Jong-Wook Kim, Cheol-Gyun Lee, Sang-Yong Jung, "Variable Mesh Adaptive Direct Search Algorithm Applied for Optimal Design of Electric Machines Based on FEA", IEEE Trans. Magn., vol. 47, no. 10, pp. 3232-3235, 2011.01
Link
|
|
[ 018
]
Minimization of Outlet Edge Force using Stair Shape Auxiliary Teeth in a Stationary Discontinuous Armature Linear Permanent Magnet Motor
|
|
Yong-Jae Kim, Sang-Yong Jung, "Minimization of Outlet Edge Force using Stair Shape Auxiliary Teeth in a Stationary Discontinuous Armature Linear Permanent Magnet Motor", IEEE Trans. Magn., vol. 47, no. 10, pp. 3228-3231, 2011.01
Link
|
|
[ 017
]
Novel Memetic Algorithm implemented With GA(Genetic Algorithm) and MADS (Mesh Adaptive Direct Search) for Optimal Design of Electromagnetic System
|
|
Youngjun Ahn, Jiseong Park, Cheol-Gyun Lee, Jong-Wook Kim, Sang-Yong Jung, "Novel Memetic Algorithm implemented With GA(Genetic Algorithm) and MADS (Mesh Adaptive Direct Search) for Optimal Design of Electromagnetic System", IEEE Trans. Magn., vol. 46, no. 6, pp. 1982-1985, 2010.06
Link
|
|
[ 016
]
A Research on Iron Loss of IPMSM With a Fractional Number of Slot Per Pole
|
|
Jang-Ho Seo, Sang-Yeop Kwak, Sang-Yong Jung, Cheol-Gyun Lee, Tae-Kyung Chung, Hyun-Kyo Jung, Jang-Ho Seo, "A Research on Iron Loss of IPMSM With a Fractional Number of Slot Per Pole", IEEE Trans. Magn., vol. 45, no. 3, pp. 1824-1827, 2009.03
Link
|
|
[ 015
]
Cogging Force Verification of the Back-yoke Length of a Moving-coil-type Slotless Linear Synchronous Motor
|
|
Yong-Jae Kim, Sang-Yong Jung, "Cogging Force Verification of the Back-yoke Length of a Moving-coil-type Slotless Linear Synchronous Motor", Journal of Magnetics, vol. 14, no. 1, pp. 47-51, 2009.03
Link
|
